[. . . ] ATTENTION: Below you will find all the explanations with numeric reference to the icons respectively in front of these safety instructions: 1- This fitting should only be installed indoors. 2- The fitting is not suitable for installation in bathrooms at least not in the specified zone. [. . . ] The lighting fitting – as well as all other products from the collection – is designed, produced and tested in accordance with the strictest European safety standards (EN 60. Declaration of conformity: Hereby, Philips Lighting, BG Consumer Luminaires declares that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: Satenrozen 13, 2550 Kontich – Belgium Electric, Magnetic and Electromagnetic Fields (“EMF”)1. Philips Lighting manufactures and sells many products targeted at consumers, which, like any electronic apparatus, have the ability to emit and receive electromagnetic signals. Philips is committed to developing, producing and marketing products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Ensure that you always install the fitting to the relevant regulations. Certain regulations indicate that lighting fittings should be installed by a qualified electrician (EG Part P for the UK). € Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. € If the luminaire is mounted on a metallic surface, this surface must be bonded to the protective earth conductor or to the equipotential bonding conductor of the installation. Verify the stated icons on the identification label on the fitting and the icons that are shown in part A of your safety instructions. € Disposal of your old product: Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. [. . . ] When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. [. . . ]